DS-K1TA70MI-T Thermal Face Recognition Terminal
DS-K1TA70MI-T face recognition terminal is a kind of access control device integrated with temperature screening function.
It can fast taking skin-surface temperature and upload abnormal temperature event to the center, which can be widely applied in multiple scenarios, such as enterprises, stations, dwellings, factories, schools, campus and so on.
◼ Supports Vanadium Oxide uncooled sensor to measure target's temperature
◼ Temperature measuring range: 30 °C to 45 °C (86 °F to 113 °F), accuracy: ± 0.5 °C
◼ Recognition distance: 0.5 to 1.5 m
◼ Fast temperature measurement mode: Detects face and takes temperature without identity authentication
◼ Multiple authentication modes are available: card and temperature, face and temperature, card and face and
temperature, etc
◼ Face mask wearing alert: If the recognizing face does not wear a mask, the device will prompt a voice reminder. At the
same time, the authentication or attendance is valid
◼ Forced mask wearing alert: If the recognizing face does not wear a mask, the device will prompt a voice reminder. At
the same time, the authentication or attendance will be failed
◼ Displays temperature measurement results on the authentication page
◼ Triggers voice prompt when detecting abnormal temperature
◼ Configurable door status (open/close) when detecting abnormal temperature
◼ Transmits online and offline temperature information to the client software via TCP/IP communication and saves the
data on the client software
◼ Face recognition duration ＜ 0.2 s/User; face recognition accuracy rate ≥ 99%
◼ 6000 face capacity, 6000 card capacity, and 100,000 event capacity
◼ Suggested height for face recognition: between 1.4 m and 1.9 m
◼ Supports 6 attendance status, including check in, check out, break in, break out, overtime in, overtime out
◼ Watchdog design and tamper function
◼ Audio prompt for authentication result
◼ NTP, manually time synchronization, and auto synchronization
◼ Connects to external access controller or Wiegand card reader via Wiegand protocol
◼ Connects to secure door control unit via RS-485 protocol to avoid the door opening when the terminal is destroyed
◼ Imports and export data to the device from the client software
It can fast taking skin-surface temperature and upload abnormal temperature event to the center, which can be widely applied in multiple scenarios, such as enterprises, stations, dwellings, factories, schools, campus and so on.
◼ Supports Vanadium Oxide uncooled sensor to measure target's temperature
◼ Temperature measuring range: 30 °C to 45 °C (86 °F to 113 °F), accuracy: ± 0.5 °C
◼ Recognition distance: 0.5 to 1.5 m
◼ Fast temperature measurement mode: Detects face and takes temperature without identity authentication
◼ Multiple authentication modes are available: card and temperature, face and temperature, card and face and
temperature, etc
◼ Face mask wearing alert: If the recognizing face does not wear a mask, the device will prompt a voice reminder. At the
same time, the authentication or attendance is valid
◼ Forced mask wearing alert: If the recognizing face does not wear a mask, the device will prompt a voice reminder. At
the same time, the authentication or attendance will be failed
◼ Displays temperature measurement results on the authentication page
◼ Triggers voice prompt when detecting abnormal temperature
◼ Configurable door status (open/close) when detecting abnormal temperature
◼ Transmits online and offline temperature information to the client software via TCP/IP communication and saves the
data on the client software
◼ Face recognition duration ＜ 0.2 s/User; face recognition accuracy rate ≥ 99%
◼ 6000 face capacity, 6000 card capacity, and 100,000 event capacity
◼ Suggested height for face recognition: between 1.4 m and 1.9 m
◼ Supports 6 attendance status, including check in, check out, break in, break out, overtime in, overtime out
◼ Watchdog design and tamper function
◼ Audio prompt for authentication result
◼ NTP, manually time synchronization, and auto synchronization
◼ Connects to external access controller or Wiegand card reader via Wiegand protocol
◼ Connects to secure door control unit via RS-485 protocol to avoid the door opening when the terminal is destroyed
◼ Imports and export data to the device from the client software
